The 22132X Power Mate Rim Sprocket System incorporates a 7-tooth, .404″ edge sprocket made for a wide range of trimming tool clients. The edge sprocket is intended for most extreme chain bar and notch arrangement, bringing about a more drawn out functional life and lower in general expenses. The sprocket framework’s two-piece plan incorporates a drum with a replaceable edge which can be changed on numerous occasions before the whole unit should be supplanted. Supplant the sprocket each three edges.
Item DETAILS
Pitch: .404″, Size: Standard 7 Spline, Tooth Count: 7
Two-piece plan incorporates a drum with a replaceable edge, permitting edge to be supplanted on various occasions before the whole unit is supplanted
Expand functional life by amplifying chain and bar groove arrangement
For best execution, supplant each three edges
Item DETAILS
Pitch: .325″, Size: Small 7 Spline, Tooth Count: 7
Two-piece plan incorporates a drum with a replaceable edge, permitting edge to be supplanted on different occasions before the whole unit is supplanted
Expand functional life by amplifying chain and bar groove arrangement
For best execution, supplant each three edges
Caution: This item can open you to synthetic compounds including Nickel, which is known to the State of California to cause malignant growth. For more data go to www.P65Warnings.ca.gov
The 10612X Power Mate Rim Sprocket is a 7-tooth, .404″ edge sprocket for a wide range of trimming tool clients. The edge sprocket is intended for greatest chain bar and depression arrangement, bringing about a more drawn out functional life and lower in general expenses. The sprocket’s two-piece plan incorporates a drum with a replacable edge which can be supplanted on different occasions before the whole unit should be supplanted. Supplant the sprocket each three edges.
Item DETAILS
Pitch: .404″, Size: Standard 7 Spline, Tooth Count: 7
Two-piece plan incorporates a drum with a replaceable edge, permitting edge to be supplanted on different occasions before the whole unit is supplanted
Expand functional life by amplifying chain and bar Sprocket Rim groove arrangement
For best execution, supplant each three edges
Oregon Power Mate edge sprockets for trimming tools. Edges float on the splined center of the drum and move side to side, permitting the chain and edge to line up with the bar as the chain goes around the bar”s groove. The edge gets the majority of the sprockets wear, and by being replaceable, it broadens the general life and worth of the sprocket framework. This Power Mate edge is radially ported, which helps eliminate sawdust and flotsam and jetsam out from the teeth. This edge additionally has wear profundity pointers which let you know when to supplant your edge. Standard splined edges have an inside sprocket bore of around 7/8″.
Edge Specifications:
Pitch .375″ (3/8″)
Teeth 7
Spline Size Standard 7 Spline (SD7)*
Bore 22.25mm (7/8″)
Measurement 35mm (1-3/8″)
Replaces Stihl part number 0000 642 1223
Replaces Husqvarna/Jonsered part number 501 59 80 02
Significant Note *SD7 Standard 7 Spline Rims have an inside measurement of around 7/8″ (less the splines) and will just fit grasp drums with that width bore. Kindly check prior to requesting.